PRF Reverse Osmosis Water Purification System

GENERAL INFO 

At last, there’s an innovation that offers customers an abundant supply of RO water, without the need for electric pumps or bulky storage tanks. 

This system features a consistent membrane efficiency and a high recovery. Moreover, it has a high impact plastic construction and compact and sleek styling.

The Reverse Osmosis System delivers up to 2611 litre per day using typical line pressure, which eliminates the need for a supplemental pump in most applications. That’s enough capacity for many small  business applications, at the price of a residential system. The RO  features a continuous flow design, so there’s no need to clear space for a storage tank.

APPLICATIONS

• Residential Drinking Water    
  
• Humidifiers
  
• Coffee makers            
  
• Aquariums
  
• Photography processing        
  
• Misters
  
• Water coolers            
  
• Pubs
  
• Steamers            
  
• Restaurants
  
• Many more profitable possibilities    
  
• Business offices        

FEATURES  |  BENEFITS

• Continuous flow - no storage tank necessary
  
• Uses line pressure only - >40 psi
  
• 5.6 lpm permeate rate @ 50 psi
  
• Requires no pump or electricity
  
• Compact design - fits easily under sink  
  
• Average Service Life:
  
  • Carbon Prefilter: 6 - 12 months or 18,927 litres
    
  • RO Membrane (x2): 2-4 Years
    
  • Carbon Postfilter: 12 - 24 months
• Consistent TDS rejection and membrane efficiency
• High recovery system
• Multiple dispensing locations off one system
• High durability Noryl and polypropylene construction provide years of dependable service
• Engineered for the fewest number of connection points - less chance of leaks
• System’s support leg also serves as a handy sump wrench
• This system requires a continuous, minimum 40-50 psi of pressure to operate properly!

LEAD FREE DRINKING TAPS INNOVATIVE AND PATENTED DESIGN

• Contains no toxic substances in sections that have contact with water 
  
• Uses certified plastic material, GE ULTEM-Ceramic and Shank, Noryl-Body
  
• Utilises the process of automation to increase the accuracy of quality control
  
• All products have a smooth 360 swivel
  
• Mounting hardware is included
  

SPECIFICATIONS

Dimensions
- Height 17.05 “ 
- Width 20.34 “ 
- Depth 9.68 “ 

Operating Temperature 
40-100F 

Operating Pressure 
40-80 psi

System Type Tankless
Connection Type Quick Connect Fittings 
Filter Type Quick Change Cartridge

Number of stages 
4

Max Flow rate (LPM) 
1.5

Rejection (%) 
92 

INSTALLATION TIPS

• Note flow direction of filter.
  
• For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with Teflon tape before installation. Install Teflon taped fittings and tighten. Use a wrench to firmly tighten connections.
  
• Flush new cartridge with 10 - 15 litres of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  
• Replace cartridge when rated capacity is reached, or when flow becomes too slow. Install in compliance with local laws and regulations.

Downloads

Specification Sheet

CONNECTING TO YOUR COLD WATER LINE

1. Isolate the Cold Water Line. Turn off the water supply to the house if necessary.
2. If your cold water line is a flexi hose only use the take-off valve kit included. (See note further note below)
3. Unscrew the flexi hose leading to the Mixer Tap where it meets the cold water line.
4. Screw the female end of flexi take-off valve onto the male thread that is exposed. (Use Teflon tape if required)
   
5. Screw the flexi pipe back onto the female end of the flexi take-off valve. (Use Teflon tape if required)
   
6. Now connect the isolating valve using Teflon tape to the body of the flexi take-off valve.
   
7. Next connect the tubing supplied by placing the brass crox nut (in reverse)  over the tubing, then insert the nylon spigot into the tube end and slide the nylon olive over the tubing.
   
8. Now insert the tubing into the isolating valve ensuring it is pushed all the way in and begin to turn the crox nut in a clockwise direction until it is tight.

NOTE: If there is no flexi hose for the cold water line under the sink then you can purchase / connect using a dishwasher take-off valve (pictured) directly onto the cold water line that feeds into the dishwasher.

 If this is also not an option you can connect to the cold water line by using either a copper or plastic pipe take-off valve (as pictured) however you will need to purchase either of these C-Clamp Kits.